TBS-10A Wireless Power Bank
- Regular Price
- $66
- Sale Price
- $66
- Regular Price
- Unit Price
- per
TBS-10A Wireless Power Bank
| Product Name: | TBS-10A Wireless Power Bank |
| Model NO. | TBS-10A Wireless |
| Powered By: | TSB Design Dubai. |
| Place of Origin: | China |
| Functions: | Contain LED screen, Wireless charging induction, 16V vehicle starting output, also contain LED lamp with master switch. |
| Charging Time: | 10000mAh |
| Start Current: | 126A |
| Peak Current: |
252A |
| Power: | 60W |
| Product Size: | 17.5 x 8.6 x 4 cm |
| Output: | 5V/2A , 9V/2A (12V Jump Start) |
| Input: | 5V/2A , 9V/A |
| Weight: | 400g |
| Lifetime: | >1000 Cycles |
| Operation Temperature: | -20C ~ 60C |
Operation Instructions
- Before start the car, please make sure the host minimum 75% LED indicated light on, then connect the blue plug fully seated into the host socket, and confirm the Cable Indicator is off.
- Connect the Red clip to the positive (+) battery terminal, Black clip to the negative (-) battery terminal.
- Start the vehicle.
- When the vehicles starts, please make sure pull up the clamp cable from power bank and then from the car battery terminals.
- Please do not connect the red and black clip to the vehicle battery terminals within 30s.
How to Work
- When using the Jump Starter make sure the blue plug is FIRMLY inserted into the Jump Starter. IF NOT, the jump starter will not start your car AND this may cause damage to the jump starter.
- Make sure the battery clamps make good clean contact with the battery terminals. IF the jump starter fails to start your car after attempts, stop and check for other possible problems.
- Remove the clamps from the battery terminal within 30 seconds after starting your car. Failure to do so may damage the jump starter.
- DO NOT connect the two battery clamps together. Doing so is not only dangerous but will also damage the jump starter and void your.
Warning
- Do not allow the appliance to get wet.
- Do not immerse the appliance in water.
- Do not operate the appliance in dangerous conditions.
- Do not store in locations where the temperature may exceed 60°C.
- Do not expose the appliance to heat.
Wireless Charging Instructions
- Click the button switch to turn on the wireless charging output function.
-Then place the power supply horizontally.
- Place the wireless charging sensor position on the back of the phone with the charging sensor area of the power supply to charge.
Display
Package
SKU: 9640000015263
